JHEMCU ExpressLRS RX24T 2.4G ELRS Radio Nano Long Range Receiver T-type Antenna 11X18mm for RC FPV Racing Freestyle Drone
Color
SPECIFICATIONS
Brand Name: NoEnName_Null
Hign-concerned Chemical: None
Is Electric: No battery
Origin: Mainland China
Material: Composite Material
Recommend Age: 14+y
RC Parts & Accs: Transmitters
Size: 11mm*18mm*3mm
For Vehicle Type: Airplanes
Use: Vehicles & Remote Control Toys
Certification: CE
Upgrade Parts/Accessories: Receiver
Remote Control Peripherals/Devices: RECEIVERS
Tool Supplies: Assembly Category
Quantity: 1 pcs
Technical parameters: KV1100
Model Number: ExpressLRS RX24T Receiver
Four-wheel Drive Attributes: Assemblage
Wheelbase: Bottom Plate
- 2.4G ISM type
- ESP8285 MCU
- SX1280IMLTRT RF
- Frequency range: 2400 MHZ To 2500 MHZ
- Maximum receiving refresh rate: 500HZ
- Minimum receiving refresh rate: 25HZ
- Working voltage: 5V
- Weight: 0.6g (without antenna)
- Size: 11mm*18mm*3mm
- RX24T: Half-wave dipole omnidirectional T-shaped antenna
- Peak gain: 3.16dB
- Double flash: code matching mode
- Slow flashing: No transmission signal is received
- Steady on: receive the transmit signal
- Fast flashing: WIFI upgrade mode
- 1. After the receiver is connected to the flight controller, connect the USB to power the flight controller. After inserting the USB for the first time, disconnect the USB as soon as the LED on the receiver turns off. Repeat the operation twice, when the USB is inserted for the third time, the LED will start to flash double, and the receiver will enter the code matching mode.
- 2. After correctly connecting the 2.4G ELRS tuner module and the remote control, copy the ELRS.LUA file to the SD card in the remote control, the directory is SD Card/Scripts/tools, and then run ELRS.LUA for Bind operation.
- 3. After the binding is successful, the LED on the receiver will become steady on, and the telemetry signal can be received at the same time.
- Receiver * 1
- Wire * 4
- T-type antenna *1
Notice: Regarding the processing of RX24T getting closer after the customer has updated the firmware: Because the RX24T firmware provided in the ELRS system has bugs, please flash the BETAFPV_2400_RX firmware.