SPECIFICATIONS

Brand Name: Readytosky

Hign-concerned Chemical: None

Is Electric: No battery

Origin: Mainland China

Material: Composite Material

Recommend Age: 14+y

RC Parts & Accs: Speed Controllers

Size: 30.5x30.5mm

For Vehicle Type: Airplanes

Use: Vehicles & Remote Control Toys

Upgrade Parts/Accessories: Frame

Remote Control Peripherals/Devices: RECEIVERS

Tool Supplies: Cutting

Quantity: 1 pcs

Technical parameters: Value 3

Model Number: F722 F7 / F405 F4

Four-wheel Drive Attributes: Assemblage

Choice: yes

Item Description :

F4 F405 Flight Controller:

Product Parameters:

MCU: STM32F405RGT6 168MHz

Gyroscope: Mpu6500

Baro:Bmp280

OSD: Betaflight SPI OSD DJI HD OSD(UART5)

Black box: 16MB

6x Uarts: UART 1/2/3/4/5/6

4x PWM outputs

1x I2C

2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 9V indicator(Red)

USB Type-C(USB2.0)

1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)

1x JST-SH1.0_6pin connector (9V/GND/T5/R5/GND/R2)

VTX 9V filtered power

DJI FPV OSD is supported by any spare UART

LED: 4 LED independent pads, support WS2812 programming lamp output.

Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,
The default receiver input is UART2(You can solder ELRS RX on UART2).

Power:

Input voltage: 3-6S

BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI

LDO 3.3V: Max.1A

FC Firmware:

BetaFlight firmware: DAKEFPVF405

INAV firmware:DAKEFPVF405

Mounting:

Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation

External size 36mm × 36mm

Flight control weight: 6.9g

Flight control onboard voltage sensor.

F7 Flight Controller Specifications:

Name: F7 F722 flight controller 

Main control chip: STM32F722RET6

MPU: MPU6500

Character overlay: AT7456E

Black box: integrated 16M Flash

Barometer: BMP280

Serial port: 6 optional

Motor output: 6 channels optional

LED strip: support

Buzzer: support

Camera_Control：support

Input voltage: 3-6S Lipo

Power output: 5V/2A, 9V/2A

Weight: 6.0g

Size: 36x36mm, mounting hole 30.5mm

Firmware: DAKEFPVF722

60A BLHeli-S 3-6S DShot600 4-in-1 ESC:

Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal

Power supply voltage: 3-6S (12-26V)

Continuous working current: 60A

No built-in 5V BEC output

Firmware: BLHeli-S

Screw hole spacing: 30.5*30.5MM

Aperture: 4MM

Weight: 14.6g

- The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.

- EMI Shell provides stronger anti-interference capability.

Package including:

Picture of F722 flight controller

Picture of F405 flight controller

F4 +60A Flytower set :

F7 +60A Flytower set :