Specification: 

Firmware Name: BETAFPV915nano RX

Type: FCC

Antenna interface: IPEX1

Maximum receive refresh rate: 200HZ

Minimum receive refresh rate: 25Hz

Working voltage: 4-5.5V

Weight: 0.65g

Size: 20mmx11mmx3mm

Work Agreement: CRSF (Betaflight)

Frequency matching steps:
1. Please first check the software version number of the ELRS high-end head or the built-in ELRS high-frequency head module. Currently, there are only major versions 1. x.x or 2. x.x, please confirm that the high-frequency head and receiver are the same major version. (For example, the high-frequency head of software version 2.0.1 and the receiver of software version 2.30 can be used for frequency matching normally, and there is no need to upgrade the high-frequency head firmware.) However, for better compatibility, it is recommended to upgrade the high-frequency head and receiver to a completely consistent software version.

2. If the receiver is quickly powered on or off three times, the LED will start to flash twice, which means that the receiver has entered frequency matching mode. Enter high-frequency head Bind operation.

3. After successful binding, the LED on the receiver will turn on continuously and can also receive telemetry signals.

4. The meaning of the receiver LED status: it is constantly on, and the frequency pairing is successful or the communication is normal. The LED dual flashing is currently pairing, and the LED slow flashing cannot receive the transmitter signal. In this case, the LED fast flashing WiFi communication mode can be updated by connecting to a computer or mobile phone.


Package Included:

1 x ELRS 915MHz Nano Receiver

1 x T type receiver antenna